Vodnický blog

 

INSTALACE WEEWX pro IP Meteostanice v systemech zalozenych na Debianu(Ubuntu, Raspbian ..)

Nejdrive je treba rict,kde se ma weewx hledat

wget -qO - http://weewx.com/keys.html | sudo apt-key add -

sudo wget -qO - http://weewx.com/apt/weewx.list | sudo tee /etc/apt/sources.list.d/weewx.list

Pokud nemate nainstalovany WGET, tak provedte jeste

sudo apt install wget

Provede update systemu:

sudo apt-get update

sudo apt-get upgrade

No a ted jiz nainstalujeme WEEWX

sudo apt-get install weewx

 

Na prvni strance vyplnime nepodstatne udaje, Jmeno a kde je MeteoStanice umistena a dame OK.

Nasledne zemepisne souradnice nasi Meteostanice, OK.

Nadmorskou vysku,kde je meteostanice, OK.

Zvolime jednotku, tedy Metric(km/h, mm, °C, mbar), OK.

A zde je dulezite nastavit spravny typ stanice, nas zajima Simulator, ktery zpracovana data prave z IP Meteostanice, ktera nema moznost posilat data primo, OK.

Dale je nutne nainstalovat apache

sudo apt-get install apache2

no a jako posledni balicek je potreba stahnout a nainstalovat plugin do Weewx.

wget -O weewx-interceptor.zip https://github.com/matthewwall/weewx-interceptor/archive/master.zip
sudo wee_extension --install weewx-interceptor.zip
sudo wee_config --reconfigure --driver=user.interceptor --no-prompt

Nez Weewx spustime, je nutne udelat par zmen v configuracnim souboru weewx

sudo vi /etc/weewx/weewx.conf

Tahle zmena je nutna!!!

najedte az na konec configuraku a zde zmente device_type = observer  ( po instalaci je acurite-bridge) a prijdete jeste radek:
port = xxxx ( na tento port budeme posilat veskerou komunikace,neni nutne, ale je to lepsi)

Dale zmenit interval posilani dat do rozhrani Weewx na 60s. Nezkousejte davat mene, jinak weewx po prvni zmene hodi chybu a zastavi se.

archive_interval = 60

No a kdo chce, muze nasledne posilat data na WunderGround

[[Wunderground]] enable = true a nastavime ID a heslo vasi Meteo,ktere mate na Wunderground

Zmenime zacatek tydne z nedele na pondeli

week_start = 0

A ted jen spustime Weewx

sudo /etc/init.d/weewx start

NUTNE!!!

Bez ceho to nebude fungovat, je presmerovani veskere komunikace(TCP) meteostanice na IP a port, ktery jsme nastavili, kde je Weewx nainstalovan. Tohle ma kazdy router jinak, takze to popisovat nema smysl.

No a pokud se vse podarilo, staci se propojit na http://IP_weewx/weewx/ , kde uvidime neco takoveho

A jako posledni, jeste plugin, ktery dava udaje do XML

wget http://android.teszdesign.hu/xml_templates/weewx_pws.xml.tmpl.tar.gz
tar zxvf weewx_pws.xml.tmpl.tar.gz
sudo mkdir /etc/weewx/skins/Standard/XML
sudo cp weewx_pws.xml.tmpl /etc/weewx/skins/Standard/XML/weewx_pws.xml.tmpl
sudo chmod 644 /etc/weewx/skins/Standard/XML/weewx_pws.xml.tmpl

Uprava configuracniho souboru skins.conf

sudo vi /etc/weewx/skins/Standard/skin.conf

 

Pod [[[MobileRadar]]] pridame:

[[[XML]]]
    template = XML/weewx_pws.xml.tmpl

 

Restartujeme Weewx

sudo /etc/init.d/weewx restart

zadame http://IP_weewx/weewx/XML/weewx_pws.xml a meli bychom videt neco takoveho:

 

Pokud by nekde chtel dostat treba UVI nebo Solarni radiaci, staci do souboru weewx_pws.xml.tmpl pridat radky:

<!--UV-->                                                                                                                                                                                                                                                                                                                  
<realtime><data realtime="UV">$current.UV.formatted<!--UV--></data></realtime>                                                                                                                                                                                                                                             
<!--RADIATION-->                                                                                                                                                                                                                                                                                                           
<realtime><data realtime="radiation">$current.radiation.formatted<!--radioation--></data></realtime>

Vnitrni teplota + vlhkost

<!--inTEMP-->
<realtime><data realtime="inTEMP">$current.inTemp.formatted<!--inTEMP--></data></realtime>
<!--inHUM-->
<realtime><data realtime="inHUM">$current.inHumidity.formatted<!--inHUM--></data></realtime>

 

Pridat lze samozrejme vice informaci, viz dokumentace weewx.